Click image to zoom

Item Code: 10A00040

Tala 16 Piece Icing Set

Trade Pack Sizes: Inner Carton = 24, Outer Carton = 72. 14 stainless steel nozzles. 26cm icing bag and coupler.
Read more
Find a stockist

Trade customer? Sign into your account.

Like this product? Share it


Icing nozzles and bag are dishwasher safe. wash the coupler by hand.


Instructions 1. Unscrew the coupler and feed the larger part through the bag to the narrow opening. 2. It may be necessary to trim the end of the bag so the head of the coupler fits tightly and allows the screw thread of the coupler to show through from the inside of the bag. 3. Place the selected nozzle onto the head of the coupler that is now showing through the tip of the bag and screw the ring back onto the coupler to secure the nozzle in place. 4. Half fill bag with icing. 5. Twist the top of the bag to force the icing to the bottom, then fold over the top of the bag squeezing the bag gently until the icing is forced through the nozzle. 6. It is advised that to get the best results, the nozzle end be kept as close as possible to the surface that is being iced. this ensures that the design does not lose its intended shape. In case of lettering it is recommended to lift the nozzle a little higher from the surface. 7. Nozzles can be changed during an icing excersise simply by unscrewing the coupler and replacing with another.


Useful Tips: How to Clean an Icing Bag

Remove the nozzle and coupler from the bag and squeeze out any leftover icing or whipped cream. Turn the bag inside out and wipe any remaining icing off, and then rinse with warm water. For any stubborn icing, scrub with a soapy sponge or cloth, and rinse again. Shake off excess water, and lay to dry flat on a dish towel. Ensure they have dried thoroughly before storing again. Piping bags will serve you for many icing sessions when cared for properly. 

Find A


We are proud to have stockists of our products all across the UK and the world. Find your nearest one by entering in your location below!